Forklift Training School Alberta

Forklift Training School Alberta - The Significance Of A Forklift Training School When Utilizing The Machinery - Industry and federal regulators have established the criteria for forklift safety training according to their current standards and regulations. Individuals wishing to utilize a forklift should complete a forklift training program before using one of these machines. The accredited Forklift Operator Training Program is designed to provide people training with the information and practical skills to become an operator of a forklift.

There are forklift operation safety regulations which should be followed pertaining to pre-shift inspections, and rules for loading and lifting.

An inspection checklist should be done and given to the supervising authority prior to beginning a shift. When a maintenance issue is uncovered, the use of the specific machine must be discontinued until the issue has been addressed. To indicate the equipment is out of service, the keys need to be removed from the ignition and a warning tag placed in a visible spot.

Loading safety rules include checking the rating capacity on the forklift nameplate and knowing if the weight of the load falls within capacity. The forklift forks should be in the down position when the forklift is starting up. Remember that there is a loss of roughly one hundred pounds carrying capacity for every inch further away from the carriage that the load is carried.

Lifting must start with the driver moving to a stopped position approximately three inches away from the load. The mast should then be leveled until it has reached a right angle with the load. Raise the forks to one inch beneath the slot on the pallet and drive forward. Then lift forks four inches. Tilt back the load to be able to secure it for moving. Drive the lift backwards if the load obscures frontal vision. Check behind and honk to alert other staff. Never allow forks to drag on the ground.

Click to Download the pdf